No products
Prices are tax included
Store Categories
Wireless TPMS (2 Wheels) - Model No TD-2700F-X02
View larger
New product
0 to 180 psi - This 2 wheel kit comes with a booster relay which gives you the option of an extra 25m to 60m signal to allow single axel caravans, trailers to be monitered. Easily upgraded to 4w,6w,8w etc later on. Monitor must run off cigarette lighter or can be hard wired in.
Product Information
What’s Included in the Kit?
- 1 x Receiver unit / monitor
- 2 x Mounting Options
- 1 x Car DC Power Adaptor
- 2 x Wireless Sensors
- 2 x AAA Batteries
- CR1632 3V Batteries
- Anti-theft nuts
- Relay / Repeater Unit
Why Tyredog™
-
Wireless and Cordless - The wireless sensors and LCD monitor ensures a quick and easy installation
-
Graphic User Interface - The LCD monitor displays both tyre pressure and temperature
-
Battery-Powered - The Sensors are battery powered and can be easily replaced.
-
Light and Compact - Extremely lightweight and compact with specially designed wireless electronic sensors
-
Real Time - High accuracy with real-time tyre pressure and temperature monitoring
-
Adjustable - Fully adjustable tyre pressure and temperature warning ranges.
-
DIY in 3 Minutes - It can be fully installed in around 3 minutes without any technical knowledge
General Features
-
The TyreDog TPMS is a DIY system that can be easily installed within minutes.
- TyreDog has a system for monitoring 2, 4 or 6 - 10 tyres.
- The 6+ wheels model comes with relay/repeater
- Simply screw onto the valve stem and lock into place
- LCD monitor, allows the user to monitor and understand the status of their tyres thus ensuring they are always well maintained
- Audible/visual alerts when tyre pressure drops below or raises above recommended level.
- Measure Pressure in PSI, KPA, BAR or KgCM
- Measure Temperature in Celsius or Fahrenheit
- High accuracy; detects leakage before harm is done
- Not affected by bumpy roads
- Allows user preset value
- Operates even when the car is stationary
- Detects both under inflation and over inflation of tyre
Relay / Repeater Unit
Sensors are programmed to this Relay which transmits the Information to the Monitor / Receiver in the cabin.
- This Relay must be mounted outside the vehicle with the distance from Relay to Sensors not exceeding 10 Metres.
- If using a Trailer, Relay must be mounted to rear of vehicle so the unit still receives a signal once the trailer has been removed.
- An optional 3-way valve system is available for trucks and buses
Wireless Sensors
- Water resistant
- Weight = 10g ± 1g
- Diameter = 18.5mm
- Height = 20mm