Wireless TPMS (10 Wheels)Model NoTD-2700F-X10

What’s Included in the Kit?

• 1 x Receiver unit / monitor
• 2 x Mounting Options
• 1 x Car DC Power Adaptor
• 10 x Wireless Sensors
• 2 x AAA Batteries
• CR1632 3V Batteries
• Anti-theft nuts
• Relay / Repeater Unit

General Features

• 

  The TyreDog TPMS is a DIY system that can be easily installed within minutes.
• TyreDog has a system for monitoring 2, 4 or 6 - 10 tyres.
• The 6+ wheels model comes with relay/repeater
• Simply screw onto the valve stem and lock into place
• LCD monitor, allows the user to monitor and understand the status of their tyres thus ensuring they are always well maintained
• Audible/visual alerts when tyre pressure drops below or raises above recommended level.
• Measure Pressure in PSI, KPA, BAR or KgCM
• Measure Temperature in Celsius or Fahrenheit
• High accuracy; detects leakage before harm is done
• Not affected by bumpy roads
• Allows user preset value
• Operates even when the car is stationary
• Detects both under inflation and over inflation of tyre

Relay / Repeater Unit

Sensors are programmed to this Relay which transmits the Information to the Monitor / Receiver in the cabin.

• This Relay must be mounted outside the vehicle with the distance from Relay to Sensors not exceeding 10 Metres.
• If using a Trailer, Relay must be mounted to rear of vehicle so the unit still receives a signal once the trailer has been removed.
• An optional 3-way valve system is available for trucks and buses

Wireless Sensors

• Water resistant
• Weight = 10g ± 1g
• Diameter = 18.5mm
• Height = 20mm