Motorcycle Wireless TPMS (2 Wheels) Handlebar Mounted TD-4100A-X2

What’s Included in the Kit?

• 1 x Receiver unit / monitor with waterproof silicone casing
• 2 x Wireless Sensors
• 1 x AAA Batteries
• 2 x CR1632 3V Batteries
• 2 x Anti-theft nuts
• Handlebar Bracket

Pressure readings up to 60psi clearly visible on the waterproof LCD monitor. This operates even when the bike is stationary.

Handlebar Bracket

General Features

• The TyreDog TPMS is a DIY system that can be easily installed within minutes.
• TyreDog has a system for monitoring 2, 4 or 6 - 10 tyres.
• The 6+ wheels model comes with relay/repeater
• Simply screw onto the valve stem and lock into place
• LCD monitor, allows the user to monitor and understand the status of their tyres thus ensuring they are always well maintained
• Audible/visual alerts when tyre pressure drops below or raises above recommended level.
• Measure Pressure in PSI, KPA, BAR or KgCM
• Measure Temperature in Celsius or Fahrenheit
• High accuracy; detects leakage before harm is done
• Not affected by bumpy roads
• Allows user preset value
• Operates even when the car is stationary
• Detects both under inflation and over inflation of tyre

Wireless Sensors

The Wireless Sensors are fitted to the wheels valve stem. Simply replace the valve cap with a Wireless Sensor and fit the supplied SecureFit ring to ensure the sensor is securely fastened. This SecureFit ring can also act as a theft deterrent.

• Water resistant
• Weight = 10g ± 1g
• Diameter = 18.5mm
• Height = 20mm